Brushless Motor Controller - PCB

June 29, 2022
State: Verified Phase
  • by J.A.M.E.S Team
    J.A.M.E.S GmbH
  • Motor Controller
  • eCAD
  • Soldering on DragonFly IV AMEs
  • DragonFly IV
  • Gluing on DragonFly IV AMEs



The brushless motor controller is designed to be suitable to control the triangle coil motor design, published by the J.A.M.E.S Team. At the current stage, it is a traditional PCB design which can be considered as the starting point to further steps towards a three-dimensional and fully integrated controller-motor-design.

Future field of application:

When looking closely to the design and the picture, it can be observed that there are additional wires soldered to realize connections that are not included in the PCB design. The next evolutionary steps of this design would be to realize these connections within the AME structures by using 3D design approaches. As result, the soldering of additional wires will become obsolete.
Additionally, the soldered COTS capacitors could be replaced by embedded AME capacitors. Finally, the complete integration of the controller with a suitable AME motor would eliminate the need of any post-print assembly steps.

Current technology limitations:

Due to the impossibility to embed COTS components automatically during the printing process and the lack of overhanging angles, the full potential of the AME design-electrifying any 3D volume- cannot be achieved.

Key Features

  • Brushless Motor Controller
  • PCB Layout


Download all

Sign Up for Downloads

Join the Community and get free access to valuable content about this design 

J.A.M.E.S invites you to join the Community

Don’t simply sit on the sidelines, become a driving force in leading AME advancements and enjoy our benefits.

Access AME

Gain Influence

Use Synergies