Our Toolkit For AME Designs - Part I
May 8, 2024
Welcome to our Electronics Laboratory, where innovation knows no bounds! Here, we've curated a collection of tools that transform ideas into reality.
Ready to dive in? Explore our lab, ignite your imagination, and unleash your potential. Feel free to click on the links and buy our tools.
All the links in this article are affiliate links and marked with *. Affiliate links are a way for us to earn a small commission when you make a purchase or take another action through those links. This commission helps support our website and allows us to continue providing valuable content to you, our readers.
Dremel 3000 - a Multi Tool
- For all of your precision electronics projects like carve, engrave, rout, cut, sand, grind, sharpen, polish and clean
- Work on your projects for extended periods of time
- EZ Twist: Switch between applications within 1 or more projects easily
- Multiple storage possibilities: packed in a sturdy case, the kit comes with a tool holder to mount the tool on the wall and allows for easy wrapping of the cord
Vacuum Sealer for the Printed Applications
- Powerful automatic vacuum sealer
- Ideal for small units of 3D printed electronics
- Multiple operating modes (dry/damp and fractionated vacuuming)
- Compact and lightweight design; 30cm seam width; 10 vacuum bags included
- Powerful vacuum capacity: 90% at -0.8 bar; strong seal (3 mm weld)
Air Humidifier - Keep a Constant Humidity Level in Your Lab!
- Humidify the whole lab and keep it on a constant level
- The humidifier filter captures and filters fine impurities and particles to ensure higher humidification efficiency
- Compact and simple: bottom fill is too complicated; with the simple top fill design, you can easily clean and refill the humidifier if necessary
Precision Balance - Precise Counting Is a Need
- Adjusting program CAL for quick setting of the balance accuracy using an external test weight at an additional price, see test weights
- High-quality tuning fork weighing system for rapid display of the weight, very precise dispensing and a high level of mechanical robustness
- Capacity display: A bargraph display lights up to show how much of the weighing range is still available
- Precise counting: The automatic reference weight optimisation of reference weight gradually improves the average piece weight value
- Compact size, practical for small spaces
- Large, shock proof weighing plate made of stainless steel
- Large glass draught shield with 3 sliding doors for easy access to the items being weighed standard, weighing space W×D×H 172×171×160 mm
LED Inspection Light
- Very helpful for soldering and inspection of the AME applications
- Multi-angle positioning: high flexibility thanks to a wide range of positioning options
- 2-in-1: LED inspection light and UV lamp in one
- 500 lumens: three light functions - strong with up to 500 lm, weak with up to 250 lm and torch function up to 70 lm
- Light is versatile
Professional Digital Multimeter - Absolutely Mandatory!
- Absolutely needed for measuring and inspection of the 3D printed applications.
- Automatic range, 6000 counts, measuring AC, DC, 1000V AC, 1000V DC, 60MΩ resistance, 6000uF electrical capacity, diode.
- VFC function 600V: Built-in VFC anti-interference start mode, can filter carrier frequency interference caused by sine wave overlap or distorted voltage signal superimposed by sine waves and stably measure the output voltage of the inverter.
- Automatic range: whenever voltage, current, resistance and other elements to be measured are selected, the measuring range is changed based on the specific value measured during the measurement.
- Automatic backlight and torch.
Soldering Station - Some Components Needs to Be Soldered
- 170MN for general use, diagonal, without bevel. Highly reduced shock on the component, ESD safe
- 1-channel supply unit 70 W with soldering iron WEP 70 and safety rest PH 70, side cutter 170MN, WSW SCN M1 solder wire 100 g, soldering tips ETA 1.6 mm, ETB 2.4 mm
- Standby and automatic setback protects tools and the environment
- Password protection secures all settings
- ESD safe soldering station, soldering iron and heat-resistant silicone cable
- WSW solder wire – universal solder wire with excellent wetting properties
- Use of ET soldering tips
- 70 W soldering iron with ergonomic design and tool-free tip change
Infrared IC Heater
A Micro-Processor controlled IC Heater and solder rework station is very helpful to manufacturing prototypes and repairing samples.
- Uses up to 1500 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large 300×320mm area.
- Parameters of Eight (8) Soldering cycles are Pre-Defined.
- Soldering cycles are keypad selected and progress displayed on the T962a LCD.
- A single windowed drawer holds assemblies within the heating chamber.
- The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down.
- Light weight and a small footprint allows the T962a to be easily bench positioned transported or stored.
Related Articles
J.A.M.E.S GmbH
0 Likes
0 Likes
Leading The Future In 3D Printing Technology And Manufacturing
03.03.2024
Featured Partners
About Us
© 2024 J.A.M.E.S GmbH.